cutting speed वाक्य
उदाहरण वाक्य
मोबाइल
- Cutting speeds on thin sheet can be as high as a minute.
- At 08 : 55, the starboard engine room flooded, cutting speed to.
- At Bethlehem Steel, Taylor developed a superheated tool steel that achieved phenomenal cutting speeds.
- Proclaimed advantages included faster cutting speeds, long blade life and improved quality of cutoff interfaces.
- While power dropped to, cutting speed to, the ship's range increased by as much as.
- Standard roughness Rz increases with the sheet thickness, but decreases with laser power and cutting speed.
- Decreasing the cutting speed may help resolve this problem, but also results in slower cutting times.
- Factors affecting the calculation of cutting speed are:
- As a wheel wears it will decrease in diameter, and its effective cutting speed will be reduced.
- The following table gives the cutting speeds for a selection of common materials under one set of conditions.
- Different materials require different cutting speeds.
- "The bank could signal a change in the cutting speed " through comment about the krona, he said.
- He brings the 101-foot vessel about, cutting speed and ordering the crew, " Recover on the starboard side ."
- The cause of the " thick and thin " problem is attributed to technique and high knife cutting speed.
- It is known that B1112 has a tool life of 60 minutes at a cutting speed of 100 sfpm.
- Titanium carbide is used in preparation of cermets, which are frequently used to machine steel materials at high cutting speed.
- On most saws in home shops, the blade freewheels at flesh-cutting speeds for a good while after power is cut.
- Larger diamond grits will provide a higher cutting speed, but will be more likely to cause chipping, burring, or cracking.
- Recommended rake angles can vary depending on the material being cut, tool material, depth of cut, cutting speed, machine, and setup.
- Machinability ratings can be used in conjunction with the Taylor tool life equation,, in order to determine cutting speeds or tool life.
cutting speed sentences in Hindi. What are the example sentences for cutting speed? cutting speed English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.